Need your help to connect remote sites
Cisco, Cisco 800, Cisco Routers, DHCP, Dynamic Host Configuration Protocol, NAT, Network Address Translation, Network connectivity, Remote access, Router configuration, Routers
I have 4 cisco 800 routers i have configured with NAT and DHCP and they are all connected to the internet via satellite. I have a database server that i want remote sites to access it has an ip 192.168.0.2. All the four LAN'S are on the network 192.168.0.0 255.255.255.0 and they are behind a public IP each. How do i configure routes on the routers for the remote clients to access the server? Kindly assist.
Software/Hardware used:
Software/Hardware used:
ASKED:
November 9, 2008 9:34 AM
UPDATED:
November 11, 2008 5:43 PM
Answer Wiki:
You will either need to create a VPN tunnel between the remote sites and the host site or somehow securely publish the database server to the internet. The VPN solution is preferrable and should be able to be accomplished with the Cisco gear you have provided that you have the correct IOS to support VPN tunnels.
To see all answers submitted to the Answer Wiki: View Answer History.
RSS - Discussions Help
Discuss This Question:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
