Comments on: Multiple subnets on one physical network

By: betojoe1980

betojoe1980 — Tue, 16 Mar 2010 08:42:01 +0000

Hi Ranteng

Im also accept the NAT as solution for your problem, but firstly i woul like to know something, your server is a Windows or LINUX ? because, if you cant use a Router, then you should see in your server, if you can do a NAT, then follow the steps.
Good Luck

By: nocleader

nocleader — Fri, 12 Mar 2010 15:07:50 +0000

This issue interested me so I looked around a bit. The followings links may shed some light: Still, I believe the best solution is a NAT device between you and your devices and the rest of the network. I understand that might not be available due to policy. Cheers!

By: nocleader

nocleader — Fri, 12 Mar 2010 14:50:33 +0000

This issue interested me so I looked around a bit. The followings links may shed some light:

http://www.networkworld.com/columnists/2004/110104gearhead.html

http://www.petri.co.il/configure_tcp_ip_to_use_dhcp_and_a_static_ip_address_at_the_same_time.htm

Still, I believe the best solution is a NAT device between you and your devices and the rest of the network. I understand that might not be available due to policy.

Cheers!

By: bdinan

bdinan — Thu, 04 Mar 2010 19:18:36 +0000

I think Dwiebsick’s answer should work but I’ve never tried it and can’t where I am right now.

Another possibility, what if you used a VM with the VM network adapter set for NAT using the 192.168.x.x range?

By: xenophon22

xenophon22 — Tue, 02 Mar 2010 20:32:58 +0000

I do not know if I can help you with an answer but I am definitely curious about how to do it.

Sadly, I think you would need two network ports (NICs) on your laptop to have them both connect at once in absence of a wireless solution.

Good luck.