Comments on: multiple lans, subnets, dsl connections on the same cables http://itknowledgeexchange.techtarget.com/itanswers/multiple-lans-subnets-dsl-connections-on-the-same-cables/ Mon, 20 May 2013 05:26:00 +0000 hourly 1 By: mshen http://itknowledgeexchange.techtarget.com/itanswers/multiple-lans-subnets-dsl-connections-on-the-same-cables/#comment-61212 mshen Mon, 23 Mar 2009 18:04:23 +0000 #comment-61212 Thanks for the update. That was a good idea, I didn’t think to create the route on the windows machines.

]]> By: jabooma http://itknowledgeexchange.techtarget.com/itanswers/multiple-lans-subnets-dsl-connections-on-the-same-cables/#comment-61185 jabooma Mon, 23 Mar 2009 14:01:35 +0000 #comment-61185 ok i tried this again and i thought i did it right before but it worked this time. must be i had something wrong or they have changed something on thier server/gateway/vpn.

i setup the cards with…

pri ip :192.168.0.x
:192.168.224.x
mask :255.255.255.0
gateway :192.168.0.1

then i added the…

route -p add 192.168.5.0 mask 255.255.255.0 192.168.224.1

now it all works. the only thing i can think of if it was on my end would be i tried to add the interface on the route command. and i also tried to use to cards. i must have missed something. thanks for the help and confirming i was on the right track.

]]> By: Jason S. Erickson http://itknowledgeexchange.techtarget.com/itanswers/multiple-lans-subnets-dsl-connections-on-the-same-cables/#comment-60998 Jason S. Erickson Wed, 18 Mar 2009 20:33:29 +0000 #comment-60998 I would VLAN them off! You willstillshare the switches but have 2 networks that cant see each other unless you want them to. They also would each have their own gateway address.
If they have newer managed procureves this should be easy to set up.

Cheers!

]]>