Home > IT Answers > DataCenter > HP ML110 G5 server Raid error
ITKE
16,755 pts.
 HP ML110 G5 server Raid error
Array Configuration Tool, HP ML110 G5 Server, HP Servers, RAID, RAID 1, RAID configuration, Windows Server 2003
I use a HP ML110 G5 Server with RAID1. When the Raid was broken and i rebuilt it under Windows 2003 Server with the Array Configuration Tool it worked. When the rebuild is finished, some data on the drives are destroyed and the system is unable to reboot. Any suggestions? user submitted

Software/Hardware used:
ASKED: March 3, 2009  4:26 PM
UPDATED: November 24, 2009  7:33 PM
RELATED QUESTIONS
Answer Wiki:
Since RAID 1 is an exact mirror, it sounds like corruption may have occured before the drive failed. Remove the failed drive and try booting to the OS. If you still can't bring the OS back up, restore from backup or repair install the OS Make sure you have the exact same drives for you array. You cannot use any SATA drives. Been there, burnet my fingers. Use RAID ready drives such as HPG6
Last Wiki Answer Submitted:  November 24, 2009  7:33 pm  by  mshen   27,325 pts.
All Answer Wiki Contributors:  mshen   27,325 pts.
To see all answers submitted to the Answer Wiki: View Answer History.


RSS - Discussions Help
Discuss This Question:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Hello,

i have the same Problem withe ML110 G5. I tried with different servers and different hard disks and it failed always. Some data where corrupted. I treid it under Windows 2003 Server and under Windows 2000 Server (not supportet from HP).

Guenther01
 10 pts.