Home > IT Answers > Networking > how to configure PA-MC-STM1 card in cisco 7206 router
ITKE
16,755 pts.
 how to configure PA-MC-STM1 card in cisco 7206 router
Cisco 7206, Cisco router configuration, Cisco Routers, Router configuration, Routers
I want to know how to configure PA-MC-STM1  card in cisco 7206 router

Software/Hardware used:
Cisco 7206 Router
ASKED: August 13, 2009  1:53 PM
UPDATED: August 13, 2009  2:30 PM
RELATED QUESTIONS
Answer Wiki:
need more info, but this will get you started. Platform Command Example FlexWAN module in Catalyst 6000 family switches and Cisco 7600 series Internet Routers interface, followed by the type (serial) module/bay/port (module-slot-number/port-adapter-bay-number/interface-port-number) shutdown The example is for interface 0 on a port adapter in module slot 5 in port adapter bay 0. Console# interface serial 5/0/0 Console# shutdown Ctrl-Z Console# Cisco 7200 VXR routers interface, followed by the type (serial) and slot/port (port-adapter-slot-number/ interface-port-number) shutdown The example is for interface 0 on a port adapter in port adapter slot 6. Router(config-if)# interface serial 6/0 Router(config-if)# shutdown Ctrl-Z Router# Cisco 7201 router interface, followed by the type (serial) and slot/port (port-adapter-slot-number/ interface-port-number) shutdown The example is for interface 0 and interface 1 on a port adapter in slot 1. Router(config)# interface serial 1/0 Router(config-if)# shutdown Router(config-if)# interface serial 1/1 Router(config-if)# shutdown Ctrl-Z Router# Cisco 7301 router interface, followed by the type (serial) and slot/port (port-adapter-slot-number/ interface-port-number) shutdown The example is for interface 0 and interface 1 on a port adapter in slot 1. Router(config)# interface serial 1/0 Router(config-if)# shutdown Router(config-if)# interface serial 1/1 Router(config-if)# shutdown Ctrl-Z Router# Cisco 7304 PCI Port Adapter Carrier Card in a Cisco 7304 router interface, followed by the type (serial) and slot/port (module-slot-number/ interface-port-number) shutdown The example is for interface 0 on a port adapter in a Cisco 7304 PCI Port Adapter Carrier Card in module slot 3 of a Cisco 7304 router. Router(config-if)# interface serial 3/0 Router(config-if)# shutdown Ctrl-Z Router# Cisco 7401ASR router interface, followed by the type (serial) and slot/port (port-adapter-slot-number/ interface-port-number) shutdown The example is for interface 0 and interface 1 on a port adapter in slot 1. Router(config)# interface serial 1/0 Router(config-if)# shutdown Router(config-if)# interface serial 1/1 Router(config-if)# shutdown Ctrl-Z Router# VIP4-80 or VIP6-80 in Cisco 7500 series routers interface, followed by the type (serial) and slot/port adapter/port (interface-processor-slot-number/ port-adapter-slot-number/ interface-port-number) shutdown The example is for interface 0 on a port adapter in port adapter slot 1 of a VIP installed in interface processor slot 1. Router(config-if)# interface serial 1/1/0 Router(config-if)# shutdown Ctrl-Z Router#
Last Wiki Answer Submitted:  August 13, 2009  2:30 pm  by  R0berth1   175 pts.
All Answer Wiki Contributors:  R0berth1   175 pts.
To see all answers submitted to the Answer Wiki: View Answer History.


RSS - Discussions Help
Discuss This Question:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _