Im setting this up for a church and well stright to the point.....
I am trying to set up 2 SSID's on the AP both on diffrent VLANS
I have a cisco 1700 router connected to the switch(FS726T) and have VLANs configured already on both the router and switch. (They work)
On the switch I have in port (one) the connects to the cisco router set to tagged and the other ports set to untagged.
i.e. port 26 tagged (connects to router) - port 1,2,3,4,5 untagged (PC side) -- VLAN 2
port 26 tagged (connects to router) - port 6,7,8,9,10 untagged (PC side) -- VLAN 3
Now I set up the two wireless SSID's
1. - office_wireless
// 2. - public_wireless not set up AT THIS POINT!
AP ip address: 192.168.4.254 - (cisco router is the dhcp) (IP is set to static)
cisco ip address: 192.168.4.1 - (the .4 is for VLAN 4)
This workes fine BEFORE I select the tick box on the AP homepage that says "Enable 802.1Q VLAN"
I enable the vlan and set SSID office_wireless to vlan 4
somthing about managment vlan id there (no idea what is) but its set to 1 (I also tryed 4 didn't work)
Then I am dissconnected from the office_wireless and dont get an ip address Issues to me.
I proceed to plug th AP directly into the cisco router and it works.
the wireless pc gets an ip address and connects to the net. But not the AP annymore.
Leaving me to manualy resset the AP to try again.
PLEASE PLEASE HELP!
I have tryed everything I know..,...
cisco 1700, netgear switch fs726t, netgear WG102
April 25, 2010 7:56 PM
April 26, 2010 12:35 AM