Dynamic Hard Drive – convert to basic – XP prof

5 pts.
Tags:
Hard drives
Microsoft Windows XP
Can you convert a dynamic hard drive to a basic one? If so how would you do it?

Answer Wiki

Thanks. We'll let you know when a new response is added.

Windows XP Professional supports two types of disk storage: basic and dynamic. Basic disk storage uses partition-oriented disks. A basic disk contains basic volumes (primary partitions, extended partitions, and logical drives).

Dynamic disk storage uses volume-oriented disks, and includes features that basic disks do not, such as the ability to create volumes that span multiple disks (spanned and striped volumes).

Before you change a basic disk to a dynamic disk, note these items:

* You must have at least 1 megabyte (MB) of free space on any master boot record (MBR) disk that you want to convert. This space is automatically reserved when the partition or volume is created in Microsoft Windows 2000 or Windows XP Professional. However, it may not be available on partitions or volumes that are created in other operating systems.
* When you convert to a dynamic disk, the existing partitions or logical drives on the basic disk are converted to simple volumes on the dynamic disk.
* After you convert to a dynamic disk, the dynamic volumes cannot be changed back to partitions. You must first delete all dynamic volumes on the disk, and then convert the dynamic disk back to a basic disk. If you want to keep your data, you must first back up or move the data to another volume.
* After you convert to a dynamic disk, local access to the dynamic disk is limited to Windows XP Professional and Windows 2000.
* If your disk contains multiple installations of Windows XP Professional or Windows 2000, do not convert to a dynamic disk. The conversion operation removes partition entries for all partitions on the disk with the exception of the system and boot volumes for the current operating system.
* Dynamic disks are not supported on portable computers or Microsoft Windows XP Home Edition.

Before you <a href=”http://www.dynamic-disk.com/convert-dynamic-disk-to-basic.html”>convert dynamic to basic disk</a>, note that all existing volumes must be deleted from the disk before you can convert it back to a basic disk. If you want to keep your data, back up the data, or move your data to another volume.

To convert a basic disk to a dynamic disk:

1. Log on as Administrator or as a member of the Administrators group.
2. Click Start, and then click Control Panel.
3. Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.
4. In the left pane, click Disk Management.
5. In the lower-right pane, right-click the basic disk that you want to convert, and then click Convert to Dynamic Disk.

NOTE:You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 0

6. Select the check box that is next to the disk that you want to convert (if it is not already selected), and then click OK.
7. Click Details if you want to view the list of volumes in the disk.
8. Click Convert.
9. Click Yes when you are prompted to convert, and then click OK.

To change a dynamic disk back to a basic disk:

1. Back up all the data on all the volumes on the disk you want to convert to a basic disk.
2. Log on as Administrator or as a member of the Administrators group.
3. Click Start, and then click Control Panel.
4. Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.
5. In the left pane, click Disk Management.
6. Right-click a volume on the dynamic disk that you want to change to a basic disk, and then click Delete Volume.
7. Click Yes when you are prompted to delete the volume.
8. Repeat steps 4 and 5 for each volume on the dynamic disk.
9. After you have deleted all the volumes on the dynamic disk, right-click the dynamic disk that you want to change to a basic disk, and then click Convert to Basic Disk.

NOTE:You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 1.
______________________________________
Step 1: BACKUP ALL YOUR DATA!!!
Next, read <a href=”http://www.petri.co.il/forums/showthread.php?t=3844″>this thread </a>for helpful information.

Yes, backup your data first.

<a href=”http://technet.microsoft.com/en-us/library/cc776315.aspx”>Here</a> is the Microsoft guide to do that (although the article is intended for Windows server 2003, it can be useful here).

<a href=”http://support.microsoft.com/kb/913964″>This Microsoft article</a> has another procedure to do the conversion (don’t pay attention to the article’s title, and look for the “workaround” section).

You might want to take a look at the following article also:
How to non-destructively convert dynamic disks to basic disks?

<a href=”http://www.dynamic-disk.com/convert-dynamic-disk-to-basic.html”>http://www.dynamic-disk.com/convert-dynamic-disk-to-basic.html</a>

Discuss This Question: 4  Replies

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when members answer or reply to this question.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy
  • Go2go
    Convert dynamic disk to basic disk, you could take a look at the following article: http://forums.techarena.in/windows-software/1168433.htm Also, use Dynamic Disk Converter to complete back to basic disk at: http://www.dynamic-disk.com/convert-dynamic-disk-to-basic.html
    30 pointsBadges:
    report
  • Apple20121314
    more information you can read the article--how to convert dynamic disk to basic disk?
    10 pointsBadges:
    report
  • Markempee
    It is possible to convert it using a software like AusLogic, but I don't personally recommend to convert it because it might affect the partitioning of your hard disk which could result to total lost of data.
    2,130 pointsBadges:
    report
  • BhargavChinni
    Hi all, I would like to know how to convert a disk from Dynamic to static - In case of a Single HDD eg: consider our Home Laptops
    10 pointsBadges:
    report

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following