40 pts.
 Driver required for Dlink Dub-E100 USB-Ethernet on Windows 7
Hi, I am using Win7. The USB-Ethernet adapter of Dlink 'DUB-E100' shown here.

The msdn website says, no need to install driver but Windows 7 doesn't detect automatically.

The CD and its website doesn't provide driver for Vista and Win7.

I tried doing it in 'compatibility mode' and 'adding a legacy device'. It didn't work.

Please help me in making it work for Windows 7.  

Thanks in advance.

-uv



Software/Hardware used:
windows 7
ASKED: July 21, 2010  4:25 PM
UPDATED: April 19, 2013  5:50 PM

Answer Wiki:
ONLY Revision B hardware is compatible with Windows 7. See this page on D-Link DUB-E100 Drivers. You did not mention if this is a 32 bit or a 64 bit operating system. But to begin troubleshooting I would go to device manager and see what the driver is listed as if it is listed at all. If it is listed remove it and allow it to be re-detected. If it is not listed in device manager it is probably not getting the proper voltage from the USB connection. Make sure it is not plugged into a USB hub and it is plugged directly into a USB 2.0 port. The hardware is compatible and native to Windows 7 so once you complete one of the above steps the device should be accessible and ready to use. Let me know how it goes.
Last Wiki Answer Submitted:  April 19, 2013  5:51 pm  by  Michael Tidmarsh   11,400 pts.
All Answer Wiki Contributors:  Michael Tidmarsh   11,400 pts. , Karl Gechlik   9,815 pts.
To see all answers submitted to the Answer Wiki: View Answer History.


Discuss This Question:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _


 

Or your device could be bad. It is outdated after all. Any reason you can’t get a new one? It’s not an expensive device.

 56,975 pts.

 

It is 32bit Operating system. It comes with a ‘yellow exclamation’ mark in device manager. I removed and made it re-detect, but no improvement. It is plugged directly into a USB 2.0 port. The same device, if I put it in XP machine it works.

 40 pts.

 

are you able to install the s/ware? if you can maybe after that you can select the compatibility mode to XP

 15,485 pts.

 

HI Jin,

The software doesnt come with .exe extension. But only .inf files. so that I couldnt install in compatbility mode.

 40 pts.