Home > IT Answers > AS/400 > CRTDEVPRT – problem creating print device on iSeries
BrentSheets
6,565 pts.
 CRTDEVPRT – problem creating print device on iSeries
CRTDEVPRT, iSeries, iSeries printing
I have created print device on my iSeries (CRTDEVPRT). Have successfully done this on many occasions on the same box and as recently as 6/9/09. When I using the same parameters using 10.7.xxx.xx IP address the report goes to PND status and does not print. Any other IP address and the configuration allows successful print jobs. I have a meeting with System Engineer and would be helpful if I were able to give the engineer something to pay attention to. I have used port 9100, port 2105. Moderator Note: This is a submitted question

Software/Hardware used:
ASKED: June 15, 2009  6:09 PM
UPDATED: June 16, 2009  1:55 PM
RELATED QUESTIONS
Answer Wiki:
Are you able to ping the device from the command line? Example: PING '10.7.xxx.xx '
Last Wiki Answer Submitted:  June 15, 2009  9:23 pm  by  Teandy   5,830 pts.
All Answer Wiki Contributors:  Teandy   5,830 pts.
To see all answers submitted to the Answer Wiki: View Answer History.


RSS - Discussions Help
Discuss This Question:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Check the subnet mask and default gateway settings on the printer (or its network interface, if separate).

Is there a message waiting on the printer itself?

djac
 900 pts.