We currently have a hub and spoke topology where all nine remote sites come back to HQ for Internet and server access. We have one site that uses about 60% of out Internet bandwidth, so we decided to drop a dedicated T1 Internet line at this site for this site's use only - all other sites will continue to come back to HQ for Internet and server access. We need to be able to configure the Cisco 1700 series router and the Windows 2000 clients at the site with the new T1 Internet circuit, so that all clients use the dedicated T1 for Internet access, but still come back to HQ for seerver access. We have dedicated point to point T1's at all of our remote sites coming back to HQ and use a private network (10.x.x.x) addressing scheme. Thanks for your assistance.