Cisco T1 configuration
Currently have three cisco 2600s connected via T1s to a 3600 at the main branch. Right now the T1s are connected to TSU 100 (one 120) units, then into a serial WIC (1T) in the routers. We have T1 DSU/CSU cards to replace the serial wics.
What would be the best configuration for the new WICs? (we have qos set up for VOIP)
Interface config on main router (3600):
interface FastEthernet0/0
ip address 10.152.56.2 255.255.255.128
service-policy output qos-voip
duplex auto
speed auto
!
interface Serial0/0
ip unnumbered FastEthernet0/0
no fair-queue
!
interface Serial0/1
ip unnumbered FastEthernet0/0
!
interface FastEthernet1/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial1/0
ip unnumbered FastEthernet0/0
!
interface Serial1/1
ip unnumbered FastEthernet0/0
Interface config on a 2600 remote router:
interface FastEthernet0/0
ip address 10.152.58.2 255.255.255.128
ip helper-address 10.152.56.100
ip directed-broadcast 67
service-policy output qos-viop
duplex auto
speed auto
!
interface Serial0/0
ip unnumbered FastEthernet0/0
no fair-queue
Software/Hardware used:
Software/Hardware used:
ASKED:
March 19, 2008 4:50 PM
UPDATED:
March 19, 2008 5:10 PM
Answer Wiki:
Last Wiki Answer Submitted:
Be the first to answer this question.
All Answer Wiki Contributors:
Be the first to answer this question.
To see all answers submitted to the Answer Wiki: View Answer History.
RSS - Discussions Help
Discuss This Question:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
