Cisco Load sharing with port forwarding different ISP’s

pts.
Tags:
Availability
Bandwidth
Cabling
Cisco
DHCP
DNS
Fault isolation
Hardware
Hubs
Networking
Networking services
Performance management
Routers
Switches
I have a 1811 series router now its set with dual internet connections two different ISP's I have 2 default routes basically It should load balance between two now my concern is I need a port forwarding as we use privite space addressing. I am including current config addresses have been changed to examples. ip sla 1 icmp-echo 24.168.1.6 ip sla schedule 1 life forever start-time now ip sla 2 icmp-echo 72.15.49.4 ip sla schedule 2 life forever start-time now ! track 123 rtr 1 reachability ! track 456 rtr 2 reachability ! interface FastEthernet0 description $ES_WAN$$FW_OUTSIDE$ ip address 24.168.1.5 255.255.255.240 no ip redirects no ip unreachables no ip proxy-arp ip nat outside no ip virtual-reassembly no ip route-cache cef no ip route-cache duplex auto speed auto ! interface FastEthernet1 ip address 72.15.49.3 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat outside ip virtual-reassembly ip route-cache flow duplex auto speed auto ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 2$$ES_LAN$$FW_INSIDE$ ip address 192.168.1.195 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly ip route-cache flow ip tcp adjust-mss 1452 ! ip local policy route-map MY_LOCAL_POLICY-2 ip route 0.0.0.0 0.0.0.0 71.249.216.1 track 123 ip route 0.0.0.0 0.0.0.0 64.8.212.209 track 456 ip route 64.8.212.209 255.255.255.255 FastEthernet0 permanent ! ip nat inside source route-map FAST-0 interface FastEthernet0 overload ip nat inside source route-map FAST-1 interface FastEthernet1 overload ip nat inside source static tcp 192.168.1.1 21 24.168.1.5 21 extendable ip nat inside source static tcp 192.168.1.1 25 24.168.1.5 25 extendable ip nat inside source static tcp 192.168.1.1 80 24.168.1.5 80 extendable ip nat inside source static tcp 192.168.1.68 1528 24.168.1.5 1528 extendable ip nat inside source static tcp 192.168.1.50 1529 24.168.1.5 1529 extendable ip nat inside source static tcp 192.168.1.48 3388 24.168.1.5 3388 extendable ip nat inside source static tcp 192.168.1.1 21 72.15.49.3 21 extendable ip nat inside source static tcp 192.168.1.1 25 72.15.49.3 25 extendable ip nat inside source static tcp 192.168.1.1 80 72.15.49.3 80 extendable ip nat inside source static tcp 192.168.1.68 1528 72.15.49.3 1528 extendable ip nat inside source static tcp 192.168.1.50 1529 72.15.49.3 1529 extendable ip nat inside source static tcp 192.168.1.48 3388 72.15.49.3 3388 extendable logging trap debugging access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 remark INSIDE_IF=Vlan1 access-list 1 remark SDM_ACL Category=2 access-list 150 permit ip 192.168.1.0 0.0.0.255 any access-list 189 permit icmp any host 72.15.49.4 echo access-list 199 permit icmp any host 24.168.1.6 echo ! route-map FAST-1 permit 10 match ip address 1 match interface FastEthernet1 ! route-map FAST-0 permit 10 match ip address 1 match interface FastEthernet0 ! route-map MY_LOCAL_POLICY-2 permit 10 match ip address 189 set interface FastEthernet1 What do you think guys will this config support load sharing with port forwarding?

Answer Wiki

Thanks. We'll let you know when a new response is added.

I was just wondering the way you gave 2 default routes.

You can apply HSRP on both the router fa0/0 and ask each fa0/0 to track their own serial..this should work.

BY the way, what is extendable means in nat.Also do you know how do i allow my pc in workgroup to get MS updates from a single pc which has internet without installing wsus.

Discuss This Question:  

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when members answer or reply to this question.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following