Comments on: Adding Wireless to small Gigabit LAN http://itknowledgeexchange.techtarget.com/itanswers/adding-wireless-to-small-gigabit-lan/ Fri, 25 May 2012 01:11:52 +0000 http://wordpress.org/?v=2.6.2 By: HeyHey http://itknowledgeexchange.techtarget.com/itanswers/adding-wireless-to-small-gigabit-lan/#comment-104812 HeyHey Tue, 13 Mar 2012 18:56:39 +0000 #comment-104812 I would use WPA _2 AES check all your devices have N compatibility drivers / NIC cards any desktop computers or hard wired systems, statically assign the IP addresses from a given pool range the rest can get their IP from DHCP you could create a VLAN for the office to separate the taffic! I would use WPA _2 AES
check all your devices have N compatibility drivers / NIC cards

any desktop computers or hard wired systems, statically assign the IP addresses from a given pool range

the rest can get their IP from DHCP
you could create a VLAN for the office to separate the taffic!

]]> By: Jersull http://itknowledgeexchange.techtarget.com/itanswers/adding-wireless-to-small-gigabit-lan/#comment-101850 Jersull Thu, 19 Jan 2012 15:40:34 +0000 #comment-101850 Gryphon3rd, thanks for replying. I configured a Linksys E4300 bu using the router's WAN link to connect to the office LAN. When a Wireless device connects to the Linksys, it provides a DHCP ip address different from the LAN ip address scheme. Since the router is being used (at this point) as simply a WAP, do you see any advantage to configuring the E4300 DHCP to provide the same addressing scheme as the office LAN or "it doesn't matter?" Thanks. Gryphon3rd, thanks for replying.

I configured a Linksys E4300 bu using the router’s WAN link to connect to the office LAN. When a Wireless device connects to the Linksys, it provides a DHCP ip address different from the LAN ip address scheme. Since the router is being used (at this point) as simply a WAP, do you see any advantage to configuring the E4300 DHCP to provide the same addressing scheme as the office LAN or “it doesn’t matter?” Thanks.

]]>