IoT Agenda

Feb 8 2018   11:10AM GMT

Dawning of the digital security border: A new standard for wide area perimeter and border security

Stewart Kantor Profile: Stewart Kantor

Tags:
Internet of Things
iot
IoT sensors
Physical security
Sensors

The digital age is upon us, with more technologies shifting from the physical to the virtual in order to simplify and improve operational effectiveness. The use of digital communications technologies with interconnected low-power sensors has been of particular interest to security operations where human monitoring and patrols present significant challenges.

Picture the U.S. borders — land or ocean — which feature large stretches of vacated terrain that require constant monitoring and security. The U.S.-Mexico border, for example, is approximately 2,000 miles long while the U.S.-Canada border is nearly 4,000 square miles. The coastlines of the U.S., including Alaska and Hawaii, represent another 12,500 miles. All in all, the U.S. has over 18,000 miles of border to monitor. To effectively monitor and patrol these borders using only human monitoring represents a significant and costly challenge with many vulnerabilities. However, with low-power sensor technology connected to long-range wide area wireless communications, effective monitoring becomes attainable.

Technology-based perimeter security in the U.S. has had its fair share of failures over the last 15 to 20 years. In Jan. 2011, the Department of Homeland Security canceled SBI-Net, a technology-based “virtual-fence,” after having spent $1 billion. This was due to technical issues with SBI-Net’s viability and cost — two issues that companies and agencies looking to establish a digital perimeter still face today. As we continue to see even larger projects proposed, such as the current administration’s push to establish a physical walled border, budget concerns to make this project a reality have overtaken the complexities of using more efficient digital technologies for perimeter monitoring.

However, a new proven industrial wireless standard known as IEEE 802.16s offers great promise to deliver the necessary coverage and security requirements of border security at a reasonable cost. This recently published wireless standard was designed from the ground up to meet the wide area coverage needs of industrial and security networks.

The standard details how to use software-defined radio (SDR) technology to transmit broadband data over a very long range with high upstream capacity. Based on the standard design, each base station tower is capable of 3,000 square miles of data coverage, thereby allowing wireless sensor and monitoring technologies to be deployed over a wide territory with minimal infrastructure. This coverage not only includes the actual perimeter line, but also spans up to 30 miles in either direction of the cell tower — creating a wider protection range rather than a single barrier.

Remote SDRs are similar to cellular modems, but far more powerful in their range. And once coverage is in place, they can be connected to low-cost sensor networks that provide intelligence and real-time feedback. This is particularly helpful in connecting and enhancing efficiency with IoT technologies used for perimeter security, such as thermal imaging, temperature or chemical monitoring, event-based video streaming and night vision.

An important part of the standard is frequency selection. For homeland security efforts such as the deployment of a digital border, the government already has access to VHF ranges that can be used for maximum coverage and minimal infrastructure.

The use of licensed spectrum also addresses the security concern with IoT technologies used for perimeter security. SBI-Net was based on low-power, consumer-based Wi-Fi technology capable of only short-range communications and vulnerable to interference. SDR technologies over licensed spectrum scale for wide areas and can create a closed-loop system, providing a digital and physical separation of wireless sensors and monitors from the public internet.

Digital perimeters will continue to be used due to their ease and efficiency once they’re established. The challenge, however, is establishing them in the first place. The new 802.16s industrial standard seems to be the right place to start.

All IoT Agenda network contributors are responsible for the content and accuracy of their posts. Opinions are of the writers and do not necessarily convey the thoughts of IoT Agenda.

 Comment on this Post

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when other members comment.

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

Share this item with your network: